arm-netbook

arm-netbook@lists.phcomp.co.uk

1079 discussions

gnu/linux distro of interest?
by calmstorm＠posteo.de 09 Nov '17

09 Nov '17

https://www.voidlinux.eu/ Luke I know you might have interest in this, because you are not fond of systemd correct? Sorry to bring that topic up again, But I think you may have interest in this gnu/linux distro for that reason. Also, it is free software if you don't load the non-free repository. The bad? If you do load the module it isn't free software. It does however use runit by default. Also, it is rolling release like parabola and it is an independent distro. pity there isn't a free software fork but still, I think you could rake in more money by making a card for it in the future. If you can figure out how to install it that is... ;P xD only kidding... you have way, way, way more experience with gnu/linux then me.

6 6

Re: [Arm-netbook] MNT Reform DIY portable computer
by ronwirring＠Safe-mail.net 29 Oct '17

29 Oct '17

-------- Original Message -------- From: Pen-Yuan Hsing <penyuanhsing(a)gmail.com> Apparently from: arm-netbook-bounces(a)lists.phcomp.co.uk To: Eco-Conscious Computing <arm-netbook(a)lists.phcomp.co.uk> Subject: [Arm-netbook] MNT Reform DIY portable computer Date: Thu, 19 Oct 2017 15:33:35 +0100 > http://mntmn.com/reform/ Can the i mx8 work on entirely libre software? Libre software gpu? > > _______________________________________________ > arm-netbook mailing list arm-netbook(a)lists.phcomp.co.uk > http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > Send large attachments to arm-netbook(a)files.phcomp.co.uk

2 2

DIY laptop part 2: camera
by David Niklas 28 Oct '17

28 Oct '17

Hello, I wanted to add a camera onto my laptop. I located two suppliers: blisscomputers.net e-consystems.com My problem is a lack of experience. I know how many MP and where the camera should start focusing at (focal length at 30CM). I don't know how long a reasonable MIPI-CSI cable can be and I found out from one of the people that a length of 50CM (my original plan). Was too long so now I have to devise a solution... My other problem is that I don't know what the f-number aught to be. My original idea for using the camera is this: lid | Lens Camera | lid | screen screen screen ~~~~~~ screen screen screen Hinge-casing-casing~~~~~~casing Then I would simple flip the camera over the top and then I could have it face me and do video conferencing or whatever. Anyone have experience with this? Thanks, David

3 2

preview of latest update
by Luke Kenneth Casson Leighton 25 Oct '17

25 Oct '17

https://www.crowdsupply.com/eoma68/micro-desktop/updates/shenzhen-maker-fai…

1 0

"NonDesktop" Proposed For RandR: Useful For VR & Apple Touch Bar Like Devices
by mike.valk＠gmail.com 20 Oct '17

20 Oct '17

https://www.phoronix.com/scan.php?page=news_item&px=NonDesktop-RandR Handy extension for the LCD touchpad.

1 0

MNT Reform DIY portable computer
by Pen-Yuan Hsing 19 Oct '17

19 Oct '17

Hi all, Just FYI, I just stumbled upon the MNT Reform project: http://mntmn.com/reform/ Is there anything here that's of use to the project? What do folks think of it? Constructive criticisms?

2 1

Hack GPD Pocket Into EOMA68 Computer?
by Alexander Ross 17 Oct '17

17 Oct '17

Looking at the tear down: https://www.reddit.com/r/GPDPocket/comments/6j1jfo/gpd_pocket_full_teardown… I can’t help myself from wondering how hard would it be to mod it into a eoma68 handheld computer? not many port holes to line upto. lcd ? lvds? i guess the inner base is mostly flat. to make a mod easier i was thinking one could use the lipo cell space for pcb instead and have a replacement back panel or 3d printed case width extender which the base lid goes on top of? kinda like this case extension for the openmoko phones [1]. To make extra room for new typical lipo or standard 18650 cells battery and some extra goodies :). Like usb ports for more storage, gps, mob modem, usb audio DAC choice or just a really big usb hub for Do What Ya Want? Maybe 3dprinted case extension or replacement back panel even would help with getting better wifi reception? put the anteriors in the plastic edging? [1] https://image.slidesharecdn.com/jmbouffardopenmokast-1233718845598943-2/95/… https://image.slidesharecdn.com/jmbouffardopenmokast-1233718845598943-2/95/… https://image.slidesharecdn.com/jmbouffardopenmokast-1233718845598943-2/95/… pics are from the end of this presentation slides: https://www.slideshare.net/jmbouffard/openmokast-the-open-broadcasting-soft…

2 1

Cost of pre-production prototypes?
by Adam Van Ymeren 12 Oct '17

12 Oct '17

Hey Luke, Your latest crowd supply update mentions wanting people to buy the pre-production prototypes and ideally help contribute to the software. How much are you planning to sell them for? I'd be interested in one, and I'd love to help contribute to the software side of this project as it's much more within my skill set than high frequency HDMI routing. Cheers, -Adam

4 11

Well, /this/ looks relevant...
by Christopher Havel 06 Oct '17

06 Oct '17

This just turned up on Hackaday. Looks like the folks over at SiFive have been very, very busy... https://hackaday.com/2017/10/04/sifive-announces-risc-v-soc/ Might want to grab a bag of popcorn, guys, I think this is one to watch.

4 7

EFI/UEFI bios question
by Joseph Lira 03 Oct '17

03 Oct '17

Hello I know this is an arm project, but honestly I didn't know where else to ask this question without getting lynch, well hopefully I wont get lynch here neither So I'm in the market for a new laptop and I recently rediscovered the finding for legbacore when if come to malware attacks on UEFI, http://www.legbacore.com/Research_files/HowManyMillionBIOSesWouldYouLikeToI… <http://www.legbacore.com/Research_files/HowManyMillionBIOSesWouldYouLikeToI…>http://www.legbacore.com/Research.html and how until today there seems to be no real solution to the problem as no manufacture continues to support hardware through bios/firmware updates after usually 1 year of purchasing a product, well Apple seems to be the only one. And no I don't consider as a solution running old x200 with coreboot or libreboot as this approach is not really practical for the day-day user. Let face is who doesn't know someone like this https://duckduckgo.com/?q=cloudy+with+a+chance+of+meatballs+dad+computer&t=… Just one thing, please don't give me the libre speech about Intel ME, I get it, I just don't want the replies to become a holy fight as to why I'm evil or x person is evil, I want to understand better the situation and possibly get some suggestions So my questions are 1. Is my pre 2014 non uefi hardware more susceptible to vulnerabilities than lets say a laptop that was bough last year that is no longer getting bios updates? 2. Should I be concerned about running old hardware? If not is there anything I can do to better protect my hardware and for the wise guy unplugging the computer from the internet is not a solution LOL 3. If I run uefi with secure boot enabled with my own keys em I more protected against having my system compromised?Remember this is not about Intel ME 4. Em I better off buying a macbook vs pc? lets face it, both are companies that are for profit and both have there own evils 5. Should I consider buying a librem laptop? Though I do think $1300 plus is to much. Seems to me that they are closer to have coreboot and disabling ME on there laptops than anyone else 6. Is there hope for the new AMD ryzen cpu at delivering what is required to port it to coreboot? Should I wait for it? 7. A little of topic but is PureOS from purism any good at doing what it promises? Or are there other distro better? thank you in advance to anyone who replies, links and articles are welcome

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

arm-netbook